![]() It would have been a significant upgrade, even with a 3Gbps SATA motherboard. I'll re-suggest that the OP should have simply gone to a SATA SSD. (New ones are from China or Hong Kong.) I'd prefer something newer, although it's the usual slope: new CPU, new RAM. Clover will not overwrite your config, kexts or acpi tables. When you run the installer pkg to update, expand UEFI Drivers and select the same drivers that you have currently installed. You can then use the preference pane to check for future updates. My favorite online retailer, Newegg, only has used or refurbished boards available from the US. Boot macOS, download the latest Clover Installer and select these options. Is a special driver being installed during a fresh Windows installation? Will that enable booting from an NVME device by itself, or will the system have to boot from a a USB drive ever after?Īs regards motherboard swaps, I see that the B75 and H77 chipsets are from 2012, and discontinued. The link that you provided gives great detail on steps, but I'm not clear on what is actually being done. The rest of the gear, cpu, graphics card, ram etc does not need to be changed.īecause the OP has purchased nvme disk ( which are not cheap ) and pcie adapter, it is a sensible way forward.Īlternatively, he could use clover on a usb stick, which is no cost.A question for clarification on the "Clover" bit. If changing only the mobo adds extra features such as usb3, sata 3 and potential nvme boot, then it might well be worth the small outlay. If I choose Windows Bootmanager in your tool it works but from there I cannot boot Linux. Some adapter cards contain option ROMs which would allow them to boot from the NVME drive, but the card you purchased does not.ĭepends. Flashed on a stick with rufus is booting fine. You can run Windows from the NVME drive, you just are not going to be able to boot your current computer from it. You don't need any special bootloader to do that, the standard Windows bootloader should be fine, it just has to be on a drive other than the NVME SSD. You will have to boot the computer from a source the motherboard does support. Your motherboard simply does not support NVME in the BIOS. Right-click on the USB drive’s EFI partition, Change Letter (ex. ![]() Please contact the motherboard or SSD supplier for better help." mount clover efi on mac mini with windows 10 install Very un-recommended approach. You need to download the NVME firmware from the motherboard website, or you can use a tool to modify the BIOS(it's risky). "If your NVME SSD can be recognized by the system, but can't be recognized by the BIOS, it's possibly because your motherboard is too old to support NVME. Time to experiment more with a bootloader perhaps?Here is a note on the Amazon listing in the link you provided: Not keen on getting another motherboard as the current one is still serviceable. ![]()
0 Comments
Leave a Reply. |